[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.15.13 (nixbld@localhost) (gcc (GCC) 9.3.0, GNU ld (GNU Binutils) 2.35.2) #1-NixOS SMP Wed Jan 5 11:42:40 UTC 2022 [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: ACPI 2.0=0xef800018 SMBIOS 3.0=0xfaca0000 MEMATTR=0xeeeaf018 RNG=0xfacbb098 MEMRESERVE=0xeed1aa98 [ 0.000000] efi: seeding entropy pool [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000EF800018 000024 (v02 NXP ) [ 0.000000] ACPI: XSDT 0x00000000EF80FE98 000074 (v01 NXP LX2160 00000000 01000013) [ 0.000000] ACPI: FACP 0x00000000EF80FB98 000114 (v06 NXP LX2160 00000000 INTL 20151124) [ 0.000000] ACPI: DSDT 0x00000000EF800098 004B00 (v02 NXP LX2160 00000000 INTL 20180629) [ 0.000000] ACPI: DBG2 0x00000000EF80FA98 000062 (v00 NXP LX2160 00000000 INTL 20151124) [ 0.000000] ACPI: GTDT 0x00000000EF80E998 000130 (v02 NXP LX2160 00000000 INTL 20151124) [ 0.000000] ACPI: APIC 0x00000000EF80EB18 000568 (v04 NXP LX2160 00000000 INTL 20151124) [ 0.000000] ACPI: MCFG 0x00000000EF80FE18 00004C (v01 NXP LX2160 000000FF INTL 20151124) [ 0.000000] ACPI: PPTT 0x00000000EF807518 000694 (v01 NXP LX2160 00000000 INTL 20151124) [ 0.000000] ACPI: SPCR 0x00000000EF80FF98 000050 (v02 NXP LX2160 00000000 INTL 20151124) [ 0.000000] ACPI: IORT 0x00000000EF80C798 001109 (v03 NXP LX2160 00000000 INTL 20151124) [ 0.000000] ACPI: VFCT 0x00000000EEE20018 00E884 (v01 NXP LX2160 00000001 AMD 31504F47) [ 0.000000] ACPI: BGRT 0x00000000EF80F998 000038 (v01 INTEL EDK2 00000002 01000013) [ 0.000000] ACPI: SPCR: console: pl011,mmio32,0x21c0000,115200 [ 0.000000] NUMA: Failed to initialise from firmware [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000027ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x27fc102140-0x27fc104fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000027ffffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ee2cffff] [ 0.000000] node 0: [mem 0x00000000ee2d0000-0x00000000ee35ffff] [ 0.000000] node 0: [mem 0x00000000ee360000-0x00000000eed1bfff] [ 0.000000] node 0: [mem 0x00000000eed1c000-0x00000000eedc0fff] [ 0.000000] node 0: [mem 0x00000000eedc1000-0x00000000ef28ffff] [ 0.000000] node 0: [mem 0x00000000ef290000-0x00000000ef7fffff] [ 0.000000] node 0: [mem 0x00000000ef800000-0x00000000fac6ffff] [ 0.000000] node 0: [mem 0x00000000fac70000-0x00000000facbffff] [ 0.000000] node 0: [mem 0x00000000facc0000-0x00000000fbdfffff] [ 0.000000] node 0: [mem 0x00000020a0000000-0x00000027ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000027ffffffff] [ 0.000000] cma: Reserved 32 MiB at 0x00000000f8c00000 [ 0.000000] psci: probing for conduit method from ACPI. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] ACPI: SRAT not present [ 0.000000] percpu: Embedded 30 pages/cpu s82072 r8192 d32616 u122880 [ 0.000000] pcpu-alloc: s82072 r8192 d32616 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8111616 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: initrd=\efi\nixos\fbfc78bf1zlf6xr5lww8vm4fiprnps1n-initrd-linux-5.15.13-initrd.efi init=/nix/store/m26s7zindh87di1lk9h3f0jk63w85ih7-nixos-system-zarathustra-21.11.335130.386234e2a61/init boot.shell_on_fail loglevel=7 usbcore.autosuspend=-1 amdgpu.pcie_gen_cap=0x4 libata.force=3.0 console=tty0 [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000f4c00000-0x00000000f8c00000] (64MB) [ 0.000000] Memory: 32151404K/32962560K available (19328K kernel code, 4560K rwdata, 10540K rodata, 10304K init, 633K bss, 778388K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] ftrace: allocating 63732 entries in 249 pages [ 0.000000] ftrace: allocated 249 pages with 6 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=16. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006200000 [ 0.000000] ACPI: SRAT not present [ 0.000000] ITS [mem 0x06020000-0x0603ffff] [ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @20a0280000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x00000020a0240000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000020a0250000 [ 0.000000] random: get_random_bytes called from start_kernel+0x4e4/0x6c8 with crng_init=0 [ 0.000000] ACPI GTDT: found 1 memory-mapped timer block(s). [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 25.00MHz (phys/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns [ 0.000000] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns [ 0.000063] Console: colour dummy device 80x25 [ 0.000265] printk: console [tty0] enabled [ 0.000299] ACPI: Core revision 20210730 [ 0.000509] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000) [ 0.000517] pid_max: default: 32768 minimum: 301 [ 0.000548] LSM: Security Framework initializing [ 0.000557] Yama: becoming mindful. [ 0.000668] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000760] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.001597] rcu: Hierarchical SRCU implementation. [ 0.002069] Platform MSI: ITS@0x6020000 domain created [ 0.002081] PCI/MSI: ITS@0x6020000 domain created [ 0.002089] fsl-mc MSI: ITS@0x6020000 domain created [ 0.002105] Remapping and enabling EFI services. [ 0.002576] smp: Bringing up secondary CPUs ... [ 0.002841] Detected PIPT I-cache on CPU1 [ 0.002861] GICv3: CPU1: found redistributor 1 region 0:0x0000000006220000 [ 0.002887] GICv3: CPU1: using allocated LPI pending table @0x00000020a0260000 [ 0.002913] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.003192] Detected PIPT I-cache on CPU2 [ 0.003210] GICv3: CPU2: found redistributor 100 region 0:0x0000000006240000 [ 0.003240] GICv3: CPU2: using allocated LPI pending table @0x00000020a0270000 [ 0.003267] CPU2: Booted secondary processor 0x0000000100 [0x410fd083] [ 0.003568] Detected PIPT I-cache on CPU3 [ 0.003579] GICv3: CPU3: found redistributor 101 region 0:0x0000000006260000 [ 0.003602] GICv3: CPU3: using allocated LPI pending table @0x00000020a0300000 [ 0.003622] CPU3: Booted secondary processor 0x0000000101 [0x410fd083] [ 0.003897] Detected PIPT I-cache on CPU4 [ 0.003914] GICv3: CPU4: found redistributor 200 region 0:0x0000000006280000 [ 0.003942] GICv3: CPU4: using allocated LPI pending table @0x00000020a0310000 [ 0.003968] CPU4: Booted secondary processor 0x0000000200 [0x410fd083] [ 0.004293] Detected PIPT I-cache on CPU5 [ 0.004307] GICv3: CPU5: found redistributor 201 region 0:0x00000000062a0000 [ 0.004329] GICv3: CPU5: using allocated LPI pending table @0x00000020a0320000 [ 0.004349] CPU5: Booted secondary processor 0x0000000201 [0x410fd083] [ 0.004614] Detected PIPT I-cache on CPU6 [ 0.004633] GICv3: CPU6: found redistributor 300 region 0:0x00000000062c0000 [ 0.004661] GICv3: CPU6: using allocated LPI pending table @0x00000020a0330000 [ 0.004686] CPU6: Booted secondary processor 0x0000000300 [0x410fd083] [ 0.004970] Detected PIPT I-cache on CPU7 [ 0.004984] GICv3: CPU7: found redistributor 301 region 0:0x00000000062e0000 [ 0.005007] GICv3: CPU7: using allocated LPI pending table @0x00000020a0340000 [ 0.005027] CPU7: Booted secondary processor 0x0000000301 [0x410fd083] [ 0.005290] Detected PIPT I-cache on CPU8 [ 0.005310] GICv3: CPU8: found redistributor 400 region 0:0x0000000006300000 [ 0.005339] GICv3: CPU8: using allocated LPI pending table @0x00000020a0350000 [ 0.005365] CPU8: Booted secondary processor 0x0000000400 [0x410fd083] [ 0.005643] Detected PIPT I-cache on CPU9 [ 0.005660] GICv3: CPU9: found redistributor 401 region 0:0x0000000006320000 [ 0.005683] GICv3: CPU9: using allocated LPI pending table @0x00000020a0360000 [ 0.005703] CPU9: Booted secondary processor 0x0000000401 [0x410fd083] [ 0.005975] Detected PIPT I-cache on CPU10 [ 0.005999] GICv3: CPU10: found redistributor 500 region 0:0x0000000006340000 [ 0.006027] GICv3: CPU10: using allocated LPI pending table @0x00000020a0370000 [ 0.006054] CPU10: Booted secondary processor 0x0000000500 [0x410fd083] [ 0.006337] Detected PIPT I-cache on CPU11 [ 0.006355] GICv3: CPU11: found redistributor 501 region 0:0x0000000006360000 [ 0.006377] GICv3: CPU11: using allocated LPI pending table @0x00000020a0380000 [ 0.006397] CPU11: Booted secondary processor 0x0000000501 [0x410fd083] [ 0.006662] Detected PIPT I-cache on CPU12 [ 0.006687] GICv3: CPU12: found redistributor 600 region 0:0x0000000006380000 [ 0.006714] GICv3: CPU12: using allocated LPI pending table @0x00000020a0390000 [ 0.006741] CPU12: Booted secondary processor 0x0000000600 [0x410fd083] [ 0.007017] Detected PIPT I-cache on CPU13 [ 0.007036] GICv3: CPU13: found redistributor 601 region 0:0x00000000063a0000 [ 0.007057] GICv3: CPU13: using allocated LPI pending table @0x00000020a03a0000 [ 0.007077] CPU13: Booted secondary processor 0x0000000601 [0x410fd083] [ 0.007352] Detected PIPT I-cache on CPU14 [ 0.007378] GICv3: CPU14: found redistributor 700 region 0:0x00000000063c0000 [ 0.007407] GICv3: CPU14: using allocated LPI pending table @0x00000020a03b0000 [ 0.007434] CPU14: Booted secondary processor 0x0000000700 [0x410fd083] [ 0.007712] Detected PIPT I-cache on CPU15 [ 0.007733] GICv3: CPU15: found redistributor 701 region 0:0x00000000063e0000 [ 0.007753] GICv3: CPU15: using allocated LPI pending table @0x00000020a03c0000 [ 0.007774] CPU15: Booted secondary processor 0x0000000701 [0x410fd083] [ 0.007817] smp: Brought up 1 node, 16 CPUs [ 0.007915] SMP: Total of 16 processors activated. [ 0.007919] CPU features: detected: 32-bit EL0 Support [ 0.007923] CPU features: detected: 32-bit EL1 Support [ 0.007927] CPU features: detected: CRC32 instructions [ 0.028124] CPU: All CPU(s) started at EL2 [ 0.028182] alternatives: patching kernel code [ 0.029047] devtmpfs: initialized [ 0.033224] KASLR enabled [ 0.033299] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.033312] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.033736] pinctrl core: initialized pinctrl subsystem [ 0.034082] SMBIOS 3.2.0 present. [ 0.034092] DMI: SolidRun Ltd. SolidRun CEX7 Platform, BIOS EDK II Dec 31 2021 [ 0.034324] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.035540] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.036142] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.036729] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.036752] audit: initializing netlink subsys (disabled) [ 0.036819] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1 [ 0.037068] thermal_sys: Registered thermal governor 'step_wise' [ 0.037071] thermal_sys: Registered thermal governor 'power_allocator' [ 0.037102] cpuidle: using governor menu [ 0.037212] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.037390] ASID allocator initialised with 32768 entries [ 0.037613] ACPI: bus type PCI registered [ 0.037618] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.037752] Serial: AMBA PL011 UART driver [ 0.041844] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.041854] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.041859] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.041864] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.042579] cryptd: max_cpu_qlen set to 1000 [ 0.043690] fbcon: Taking over console [ 0.043729] ACPI: Added _OSI(Module Device) [ 0.043734] ACPI: Added _OSI(Processor Device) [ 0.043738] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.043742] ACPI: Added _OSI(Processor Aggregator Device) [ 0.043747] ACPI: Added _OSI(Linux-Dell-Video) [ 0.043751] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.043755] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.047128] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.049343] ACPI: Interpreter enabled [ 0.049350] ACPI: Using GIC for interrupt routing [ 0.049367] ACPI: MCFG table detected, 2 entries [ 0.055424] ACPI: PM: Power Resource [FN1L] [ 0.055467] ACPI: PM: Power Resource [FN1H] [ 0.055507] ACPI: PM: Power Resource [FN1F] [ 0.056372] ARMH0011:00: ttyAMA0 at MMIO 0x21c0000 (irq = 79, base_baud = 0) is a SBSA [ 1.393039] printk: console [ttyAMA0] enabled [ 1.397958] ARMH0011:01: ttyAMA1 at MMIO 0x21d0000 (irq = 80, base_baud = 0) is a SBSA [ 1.406816] Machine: NXP Layerscape LX2160ACEX7 [ 1.411352] SoC family: QorIQ LX2160A [ 1.415003] SoC ID: svr:0x87360020, Revision: 2.0 [ 1.420303] ACPI: PCI Root Bridge [PCI0] (domain 0002 [bus 01-ff]) [ 1.426488] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.435696] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME PCIeCapability LTR] [ 1.443434] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME PCIeCapability LTR] [ 1.452297] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_SUPPORT) [ 1.460709] acpi PNP0A08:00: ECAM area [mem 0x9000100000-0x900fffffff] reserved by PNP0C02:00 [ 1.471808] acpi PNP0A08:00: ECAM at [mem 0x9000100000-0x900fffffff] for [bus 01-ff] [ 1.479574] ACPI: Remapped I/O 0x0000009010000000 to [io 0x0000-0xffff window] [ 1.487006] PCI host bridge to bus 0002:01 [ 1.491098] pci_bus 0002:01: root bus resource [mem 0x9040000000-0x90ffffffff window] (bus address [0x40000000-0xffffffff]) [ 1.502219] pci_bus 0002:01: root bus resource [mem 0x9400000000-0x97ffffffff window] [ 1.510041] pci_bus 0002:01: root bus resource [io 0x0000-0xffff window] [ 1.516821] pci_bus 0002:01: root bus resource [bus 01-ff] [ 1.522390] pci 0002:01:00.0: [8086:f1a8] type 00 class 0x010802 [ 1.528408] pci 0002:01:00.0: reg 0x10: [mem 0x9046000000-0x9046003fff 64bit] [ 1.535769] pci 0002:01:00.0: BAR 0: assigned [mem 0x9400000000-0x9400003fff 64bit] [ 1.543428] pci_bus 0002:01: resource 4 [mem 0x9040000000-0x90ffffffff window] [ 1.550643] pci_bus 0002:01: resource 5 [mem 0x9400000000-0x97ffffffff window] [ 1.557857] pci_bus 0002:01: resource 6 [io 0x0000-0xffff window] [ 1.564160] ACPI: PCI Root Bridge [PCI1] (domain 0004 [bus 01-ff]) [ 1.570339] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.579533] acpi PNP0A08:01: _OSC: OS requested [PCIeHotplug PME PCIeCapability LTR] [ 1.587270] acpi PNP0A08:01: _OSC: platform willing to grant [PCIeHotplug PME PCIeCapability LTR] [ 1.596134] acpi PNP0A08:01: _OSC: platform retains control of PCIe features (AE_SUPPORT) [ 1.604545] acpi PNP0A08:01: ECAM area [mem 0xa000100000-0xa00fffffff] reserved by PNP0C02:00 [ 1.615660] acpi PNP0A08:01: ECAM at [mem 0xa000100000-0xa00fffffff] for [bus 01-ff] [ 1.623421] ACPI: Remapped I/O 0x000000a010000000 to [io 0x10000-0x1ffff window] [ 1.631023] PCI host bridge to bus 0004:01 [ 1.635114] pci_bus 0004:01: root bus resource [mem 0xa040000000-0xa0ffffffff window] (bus address [0x40000000-0xffffffff]) [ 1.646237] pci_bus 0004:01: root bus resource [mem 0xa400000000-0xa7ffffffff window] [ 1.654067] pci_bus 0004:01: root bus resource [io 0x10000-0x1ffff window] (bus address [0x0000-0xffff]) [ 1.663628] pci_bus 0004:01: root bus resource [bus 01-ff] [ 1.669199] pci 0004:01:00.0: [1002:699f] type 00 class 0x030000 [ 1.675214] pci 0004:01:00.0: reg 0x10: [mem 0xa400000000-0xa40fffffff 64bit pref] [ 1.682785] pci 0004:01:00.0: reg 0x18: [mem 0xa410000000-0xa4101fffff 64bit pref] [ 1.690352] pci 0004:01:00.0: reg 0x20: [io 0x10000-0x100ff] [ 1.696095] pci 0004:01:00.0: reg 0x24: [mem 0xa046000000-0xa04603ffff] [ 1.702706] pci 0004:01:00.0: reg 0x30: [mem 0xa0fffe0000-0xa0ffffffff pref] [ 1.709750] pci 0004:01:00.0: enabling Extended Tags [ 1.714724] pci 0004:01:00.0: BAR 0: assigned to efifb [ 1.719915] pci 0004:01:00.0: supports D1 D2 [ 1.724177] pci 0004:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.730634] pci 0004:01:00.1: [1002:aae0] type 00 class 0x040300 [ 1.736646] pci 0004:01:00.1: reg 0x10: [mem 0xa046040000-0xa046043fff 64bit] [ 1.743796] pci 0004:01:00.1: enabling Extended Tags [ 1.748801] pci 0004:01:00.1: supports D1 D2 [ 1.753159] pci 0004:01:00.0: BAR 0: assigned [mem 0xa400000000-0xa40fffffff 64bit pref] [ 1.761251] pci 0004:01:00.0: BAR 2: assigned [mem 0xa410000000-0xa4101fffff 64bit pref] [ 1.769339] pci 0004:01:00.0: BAR 5: assigned [mem 0xa040000000-0xa04003ffff] [ 1.776468] pci 0004:01:00.0: BAR 6: assigned [mem 0xa040040000-0xa04005ffff pref] [ 1.784030] pci 0004:01:00.1: BAR 0: assigned [mem 0xa410200000-0xa410203fff 64bit] [ 1.791684] pci 0004:01:00.0: BAR 4: assigned [io 0x10000-0x100ff] [ 1.797945] pci_bus 0004:01: resource 4 [mem 0xa040000000-0xa0ffffffff window] [ 1.805159] pci_bus 0004:01: resource 5 [mem 0xa400000000-0xa7ffffffff window] [ 1.812372] pci_bus 0004:01: resource 6 [io 0x10000-0x1ffff window] [ 1.821496] iommu: Default domain type: Translated [ 1.826376] iommu: DMA domain TLB invalidation policy: strict mode [ 1.832693] pci 0004:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none [ 1.840953] pci 0004:01:00.0: vgaarb: bridge control possible [ 1.846691] pci 0004:01:00.0: vgaarb: setting as boot device (VGA legacy resources not available) [ 1.855554] vgaarb: loaded [ 1.858405] SCSI subsystem initialized [ 1.862221] libata version 3.00 loaded. [ 1.862266] ACPI: bus type USB registered [ 1.866300] usbcore: registered new interface driver usbfs [ 1.871789] usbcore: registered new interface driver hub [ 1.877107] usbcore: registered new device driver usb [ 1.882553] i2c i2c-0: IMX I2C adapter registered [ 1.887432] i2c i2c-1: IMX I2C adapter registered [ 1.892203] pps_core: LinuxPPS API ver. 1 registered [ 1.897166] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.906305] PTP clock support registered [ 1.910246] EDAC MC: Ver: 3.0.0 [ 1.913593] Registered efivars operations [ 1.918058] FPGA manager framework [ 1.921484] Advanced Linux Sound Architecture Driver Initialized. [ 1.927969] clocksource: Switched to clocksource arch_sys_counter [ 1.954208] VFS: Disk quotas dquot_6.6.0 [ 1.958159] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.965177] pnp: PnP ACPI init [ 1.968478] system 00:00: [mem 0x03600000-0x036fffff] has been reserved [ 1.975147] system 00:01: [mem 0x03800000-0x038fffff] has been reserved [ 1.981805] system 00:02: [mem 0x9000000000-0x900fffffff] could not be reserved [ 1.989112] system 00:02: [mem 0xa000000000-0xa00fffffff] could not be reserved [ 1.996485] pnp: PnP ACPI: found 3 devices [ 2.003275] NET: Registered PF_INET protocol family [ 2.008534] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.019455] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 2.028306] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 2.037114] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 2.044872] TCP: Hash tables configured (established 262144 bind 65536) [ 2.051797] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear) [ 2.059617] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.066769] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 2.074408] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.080284] RPC: Registered named UNIX socket transport module. [ 2.086203] RPC: Registered udp transport module. [ 2.090898] RPC: Registered tcp transport module. [ 2.095592] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.102034] NET: Registered PF_XDP protocol family [ 2.106876] pci 0004:01:00.1: D0 power state depends on 0004:01:00.0 [ 2.113229] PCI: CLS 0 bytes, default 64 [ 2.117238] Trying to unpack rootfs image as initramfs... [ 2.208839] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available [ 2.216796] kvm [1]: IPA Size Limit: 44 bits [ 2.221678] kvm [1]: vgic-v2@c0e0000 [ 2.225265] kvm [1]: GIC system register CPU interface enabled [ 2.231819] kvm [1]: vgic interrupt IRQ9 [ 2.235994] kvm [1]: Hyp mode initialized successfully [ 2.243340] Initialise system trusted keyrings [ 2.247851] workingset: timestamp_bits=42 max_order=23 bucket_order=0 [ 2.256266] zbud: loaded [ 2.259255] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.265307] NFS: Registering the id_resolver key type [ 2.270368] Key type id_resolver registered [ 2.274545] Key type id_legacy registered [ 2.278577] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.285272] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.292721] 9p: Installing v9fs 9p2000 file system support [ 2.315534] Key type asymmetric registered [ 2.319630] Asymmetric key parser 'x509' registered [ 2.324527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 2.331995] io scheduler mq-deadline registered [ 2.336521] io scheduler kyber registered [ 2.343143] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.351540] ACPI: button: Power Button [PWRB] [ 2.357863] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.363531] ACPI: thermal: Thermal Zone [THM0] (50 C) [ 2.368879] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.374533] ACPI: thermal: Thermal Zone [THM1] (50 C) [ 2.379857] thermal LNXTHERM:02: registered as thermal_zone2 [ 2.385511] ACPI: thermal: Thermal Zone [THM2] (49 C) [ 2.390840] thermal LNXTHERM:03: registered as thermal_zone3 [ 2.396494] ACPI: thermal: Thermal Zone [THM3] (50 C) [ 2.401837] thermal LNXTHERM:04: registered as thermal_zone4 [ 2.407490] ACPI: thermal: Thermal Zone [THM4] (48 C) [ 2.412887] thermal LNXTHERM:05: registered as thermal_zone5 [ 2.418540] ACPI: thermal: Thermal Zone [THM5] (51 C) [ 2.423955] thermal LNXTHERM:06: registered as thermal_zone6 [ 2.429608] ACPI: thermal: Thermal Zone [THM6] (50 C) [ 2.441511] thermal LNXTHERM:07: registered as thermal_zone7 [ 2.447170] ACPI: thermal: Thermal Zone [THM7] (49 C) [ 2.452305] EINJ: EINJ table not found. [ 2.456310] ACPI GTDT: found 1 SBSA generic Watchdog(s). [ 2.465413] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.468567] Freeing initrd memory: 27556K [ 2.472520] SuperH (H)SCI(F) driver initialized [ 2.480303] msm_serial: driver initialized [ 2.484638] arm-smmu arm-smmu.0.auto: probing hardware configuration... [ 2.491248] arm-smmu arm-smmu.0.auto: SMMUv2 with: [ 2.496031] arm-smmu arm-smmu.0.auto: stage 1 translation [ 2.501507] arm-smmu arm-smmu.0.auto: stage 2 translation [ 2.506983] arm-smmu arm-smmu.0.auto: nested translation [ 2.512374] arm-smmu arm-smmu.0.auto: coherent table walk [ 2.517851] arm-smmu arm-smmu.0.auto: (IDR0.CTTW overridden by FW configuration) [ 2.525326] arm-smmu arm-smmu.0.auto: stream matching with 128 register groups [ 2.532628] arm-smmu arm-smmu.0.auto: 64 context banks (0 stage-2 only) [ 2.539328] arm-smmu arm-smmu.0.auto: Supported page sizes: 0x61311000 [ 2.545935] arm-smmu arm-smmu.0.auto: Stage-1: 48-bit VA -> 48-bit IPA [ 2.552541] arm-smmu arm-smmu.0.auto: Stage-2: 48-bit IPA -> 48-bit PA [ 2.559194] arm-smmu arm-smmu.0.auto: preserved 1 boot mapping [ 2.570606] loop: module loaded [ 2.574003] megasas: 07.717.02.00-rc1 [ 2.578138] ahci NXP0004:00: supply ahci not found, using dummy regulator [ 2.584974] ahci NXP0004:00: supply phy not found, using dummy regulator [ 2.591686] ahci NXP0004:00: supply target not found, using dummy regulator [ 2.598689] ahci NXP0004:00: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 2.606950] ahci NXP0004:00: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 2.616235] scsi host0: ahci [ 2.619206] ata1: FORCE: PHY spd limit set to 3.0Gbps [ 2.624263] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 87 [ 2.632432] ahci NXP0004:01: supply ahci not found, using dummy regulator [ 2.639255] ahci NXP0004:01: supply phy not found, using dummy regulator [ 2.645976] ahci NXP0004:01: supply target not found, using dummy regulator [ 2.652971] ahci NXP0004:01: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 2.661232] ahci NXP0004:01: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 2.670489] scsi host1: ahci [ 2.673433] ata2: FORCE: PHY spd limit set to 3.0Gbps [ 2.678478] ata2: SATA max UDMA/133 mmio [mem 0x03210000-0x0321ffff] port 0x100 irq 90 [ 2.686623] ahci NXP0004:02: supply ahci not found, using dummy regulator [ 2.693448] ahci NXP0004:02: supply phy not found, using dummy regulator [ 2.700159] ahci NXP0004:02: supply target not found, using dummy regulator [ 2.707155] ahci NXP0004:02: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 2.715415] ahci NXP0004:02: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 2.724681] scsi host2: ahci [ 2.727618] ata3: FORCE: PHY spd limit set to 3.0Gbps [ 2.732667] ata3: SATA max UDMA/133 mmio [mem 0x03220000-0x0322ffff] port 0x100 irq 93 [ 2.740811] ahci NXP0004:03: supply ahci not found, using dummy regulator [ 2.747639] ahci NXP0004:03: supply phy not found, using dummy regulator [ 2.754362] ahci NXP0004:03: supply target not found, using dummy regulator [ 2.761355] ahci NXP0004:03: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 2.769615] ahci NXP0004:03: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 2.778879] scsi host3: ahci [ 2.781821] ata4: FORCE: PHY spd limit set to 3.0Gbps [ 2.786867] ata4: SATA max UDMA/133 mmio [mem 0x03230000-0x0323ffff] port 0x100 irq 96 [ 2.795764] libphy: Fixed MDIO Bus: probed [ 2.800231] tun: Universal TUN/TAP device driver, 1.6 [ 2.805492] thunder_xcv, ver 1.0 [ 2.808729] thunder_bgx, ver 1.0 [ 2.811958] nicpf, ver 1.0 [ 2.814853] libphy: Freescale XGMAC MDIO Bus: probed [ 2.820461] libphy: Freescale XGMAC MDIO Bus: probed [ 2.825687] hclge is initializing [ 2.829004] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.836219] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.841540] e1000: Intel(R) PRO/1000 Network Driver [ 2.846410] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.852163] e1000e: Intel(R) PRO/1000 Network Driver [ 2.857124] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.863051] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.868441] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.874016] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 2.880275] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 2.886263] sky2: driver version 1.30 [ 2.890140] VFIO - User Level meta-driver version: 0.3 [ 2.896733] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.903273] ehci-pci: EHCI PCI platform driver [ 2.907722] ehci-platform: EHCI generic platform driver [ 2.912969] ehci-orion: EHCI orion driver [ 2.916994] ehci-exynos: EHCI Exynos driver [ 2.921191] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.927366] ohci-pci: OHCI PCI platform driver [ 2.931815] ohci-platform: OHCI generic platform driver [ 2.937059] ohci-exynos: OHCI Exynos driver [ 2.941304] sysfs: cannot create duplicate filename '/devices/platform/808622B7:00/xhci-hcd.1.auto/software_node' [ 2.951560] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.13 #1-NixOS [ 2.958078] Hardware name: SolidRun Ltd. SolidRun CEX7 Platform, BIOS EDK II Dec 31 2021 [ 2.966157] Call trace: [ 2.968591] dump_backtrace+0x0/0x1d8 [ 2.972252] show_stack+0x20/0x30 [ 2.975558] dump_stack_lvl+0x68/0x84 [ 2.979210] dump_stack+0x18/0x34 [ 2.982514] sysfs_warn_dup+0x6c/0x88 [ 2.986171] sysfs_do_create_link_sd.isra.0+0x140/0x148 [ 2.991385] sysfs_create_link+0x2c/0x50 [ 2.995297] software_node_notify+0x98/0x108 [ 2.999559] device_create_managed_software_node+0xc0/0xf0 [ 3.005034] iort_named_component_init+0x94/0xd8 [ 3.009642] iort_iommu_configure_id+0x98/0x190 [ 3.014161] acpi_dma_configure_id+0xcc/0x178 [ 3.018509] platform_dma_configure+0x8c/0x98 [ 3.022856] really_probe+0x78/0x430 [ 3.026421] __driver_probe_device+0x11c/0x190 [ 3.030854] driver_probe_device+0x88/0x118 [ 3.035025] __driver_attach+0xc4/0x1a8 [ 3.038850] bus_for_each_dev+0x78/0xc8 [ 3.042675] driver_attach+0x2c/0x38 [ 3.046238] bus_add_driver+0x14c/0x230 [ 3.050063] driver_register+0x6c/0x128 [ 3.053888] __platform_driver_register+0x30/0x40 [ 3.058581] xhci_plat_init+0x38/0x44 [ 3.062236] do_one_initcall+0x50/0x230 [ 3.066061] kernel_init_freeable+0x27c/0x320 [ 3.070407] kernel_init+0x2c/0x138 [ 3.073887] ret_from_fork+0x10/0x20 [ 3.077542] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.083039] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 3.090771] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000000010010 [ 3.100175] xhci-hcd xhci-hcd.1.auto: irq 100, io mem 0x03100000 [ 3.106487] hub 1-0:1.0: USB hub found [ 3.108002] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 3.110243] hub 1-0:1.0: 1 port detected [ 3.120406] ata1.00: supports DRM functions and may not be fully accessible [ 3.120475] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.127366] ata1.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT01B6Q, max UDMA/133 [ 3.132848] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 3.139884] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32) [ 3.147539] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 3.159999] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 3.160603] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.174868] ata2.00: ATA-11: ST16000NE000-2RW103, EN02, max UDMA/133 [ 3.175030] hub 2-0:1.0: USB hub found [ 3.181222] ata2.00: 31251759104 sectors, multi 16: LBA48 NCQ (depth 32) [ 3.191698] ata1.00: Features: Trust Dev-Sleep [ 3.191701] hub 2-0:1.0: 1 port detected [ 3.191712] ata2.00: configured for UDMA/133 [ 3.191825] sysfs: cannot create duplicate filename '/devices/platform/808622B7:01/xhci-hcd.2.auto/software_node' [ 3.191829] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.13 #1-NixOS [ 3.191832] Hardware name: SolidRun Ltd. SolidRun CEX7 Platform, BIOS EDK II Dec 31 2021 [ 3.191834] Call trace: [ 3.191835] dump_backtrace+0x0/0x1d8 [ 3.191842] show_stack+0x20/0x30 [ 3.191845] dump_stack_lvl+0x68/0x84 [ 3.191848] dump_stack+0x18/0x34 [ 3.191851] sysfs_warn_dup+0x6c/0x88 [ 3.191854] sysfs_do_create_link_sd.isra.0+0x140/0x148 [ 3.191857] sysfs_create_link+0x2c/0x50 [ 3.191860] software_node_notify+0x98/0x108 [ 3.191864] device_create_managed_software_node+0xc0/0xf0 [ 3.191868] iort_named_component_init+0x94/0xd8 [ 3.191871] iort_iommu_configure_id+0x98/0x190 [ 3.191874] acpi_dma_configure_id+0xcc/0x178 [ 3.191877] platform_dma_configure+0x8c/0x98 [ 3.191881] really_probe+0x78/0x430 [ 3.191883] __driver_probe_device+0x11c/0x190 [ 3.191886] driver_probe_device+0x88/0x118 [ 3.191888] __driver_attach+0xc4/0x1a8 [ 3.191891] bus_for_each_dev+0x78/0xc8 [ 3.191894] driver_attach+0x2c/0x38 [ 3.191896] bus_add_driver+0x14c/0x230 [ 3.191898] driver_register+0x6c/0x128 [ 3.191901] __platform_driver_register+0x30/0x40 [ 3.191904] xhci_plat_init+0x38/0x44 [ 3.191908] do_one_initcall+0x50/0x230 [ 3.191911] kernel_init_freeable+0x27c/0x320 [ 3.191913] kernel_init+0x2c/0x138 [ 3.191917] ret_from_fork+0x10/0x20 [ 3.191995] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.192001] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 3.192079] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000000010010 [ 3.192097] xhci-hcd xhci-hcd.2.auto: irq 101, io mem 0x03110000 [ 3.192343] hub 3-0:1.0: USB hub found [ 3.192355] hub 3-0:1.0: 1 port detected [ 3.192467] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.192472] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 3.192476] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 3.192506] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.192682] hub 4-0:1.0: USB hub found [ 3.192692] hub 4-0:1.0: 1 port detected [ 3.192871] usbcore: registered new interface driver usb-storage [ 3.195674] rtc-efi rtc-efi.0: registered as rtc0 [ 3.196519] ata1.00: supports DRM functions and may not be fully accessible [ 3.196803] rtc-efi rtc-efi.0: setting system clock to 2022-01-16T11:40:44 UTC (1642333244) [ 3.196957] i2c_dev: i2c /dev entries driver [ 3.197883] sbsa-gwdt sbsa-gwdt.0: Initialized with 10s timeout @ 25000050 Hz, action=0. [ 3.198461] sdhci: Secure Digital Host Controller Interface driver [ 3.198463] sdhci: Copyright(c) Pierre Ossman [ 3.198605] Synopsys Designware Multimedia Card Interface Driver [ 3.198784] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.215996] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 3.224192] ata1.00: configured for UDMA/133 [ 3.224658] mmc0: SDHCI controller on NXP0003:00 [NXP0003:00] using ADMA 64-bit [ 3.229492] ledtrig-cpu: registered to indicate activity on CPUs [ 3.231646] ata3.00: ATA-9: HGST HUH721212ALE600, LEGNT3D0, max UDMA/133 [ 3.231789] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 [ 3.232057] ata1.00: Enabling discard_zeroes_data [ 3.232136] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.232152] sd 0:0:0:0: [sda] Write Protect is off [ 3.232155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.232179] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.232198] scsi 1:0:0:0: Direct-Access ATA ST16000NE000-2RW EN02 PQ: 0 ANSI: 5 [ 3.232529] sd 1:0:0:0: [sdb] 31251759104 512-byte logical blocks: (16.0 TB/14.6 TiB) [ 3.232534] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 3.232550] sd 1:0:0:0: [sdb] Write Protect is off [ 3.232553] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.232580] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.232819] ata1.00: Enabling discard_zeroes_data [ 3.235561] efifb: probing for efifb [ 3.238601] ata3.00: 23437770752 sectors, multi 0: LBA48 NCQ (depth 32) [ 3.249281] ata3.00: configured for UDMA/133 [ 3.254560] efifb: framebuffer at 0xa400000000, using 32400k, total 32400k [ 3.255145] mmc1: SDHCI controller on NXP0003:01 [NXP0003:01] using ADMA 64-bit [ 3.255470] sda: sda2 sda127 sda128 [ 3.255742] ata1.00: Enabling discard_zeroes_data [ 3.256912] sd 0:0:0:0: [sda] supports TCG Opal [ 3.256915] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.258546] scsi 2:0:0:0: Direct-Access ATA HGST HUH721212AL T3D0 PQ: 0 ANSI: 5 [ 3.262671] efifb: mode is 3840x2160x32, linelength=15360, pages=1 [ 3.262674] efifb: scrolling: redraw [ 3.268007] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 3.268431] sd 2:0:0:0: [sdc] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB) [ 3.268655] ata4.00: ATA-11: ST12000VN0008-2PH103, SC61, max UDMA/133 [ 3.268661] ata4.00: 23437770752 sectors, multi 16: LBA48 NCQ (depth 32) [ 3.269252] ata4.00: configured for UDMA/133 [ 3.269420] scsi 3:0:0:0: Direct-Access ATA ST12000VN0008-2P SC61 PQ: 0 ANSI: 5 [ 3.269721] sd 3:0:0:0: [sdd] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB) [ 3.269725] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 3.269739] sd 3:0:0:0: [sdd] Write Protect is off [ 3.269742] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.269765] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.272763] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 3.282727] sdb: sdb1 [ 3.285996] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 3.286013] sd 2:0:0:0: [sdc] Write Protect is off [ 3.289835] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.294005] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.294031] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.299628] random: fast init done [ 3.352011] mmc0: tuning execution failed: -110 [ 3.371411] sdd: sdd1 [ 3.379992] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 3.382496] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.383836] sdc: sdc1 [ 3.384118] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.387605] mmc1: new HS200 MMC card at address 0001 [ 3.387905] mmcblk1: mmc1:0001 DF4064 58.2 GiB [ 3.389291] mmcblk1: p1 [ 3.389523] mmcblk1boot0: mmc1:0001 DF4064 4.00 MiB [ 3.390271] mmcblk1boot1: mmc1:0001 DF4064 4.00 MiB [ 3.426682] mmc0: new high speed SDXC card at address 0001 [ 3.430458] mmcblk1rpmb: mmc1:0001 DF4064 4.00 MiB, chardev (511:0) [ 3.438391] mmcblk0: mmc0:0001 00000 119 GiB [ 3.479997] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 3.708129] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 3.714354] hub 1-1:1.0: USB hub found [ 3.753201] hub 2-1:1.0: USB hub found [ 3.756058] hub 1-1:1.0: 4 ports detected [ 3.760310] hub 2-1:1.0: 4 ports detected [ 3.833533] Console: switching to colour frame buffer device 480x135 [ 3.862989] fb0: EFI VGA frame buffer device [ 3.868541] pstore: Registered efi as persistent store backend [ 3.874505] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 3.881036] hid: raw HID events driver (C) Jiri Kosina [ 3.886371] usbcore: registered new interface driver usbhid [ 3.891963] usbhid: USB HID core driver [ 3.895914] ashmem: initialized [ 3.896618] hub 3-1:1.0: USB hub found [ 3.900227] drop_monitor: Initializing network drop monitor service [ 3.903076] hub 3-1:1.0: 4 ports detected [ 3.909341] NET: Registered PF_INET6 protocol family [ 3.919580] Segment Routing with IPv6 [ 3.923274] In-situ OAM (IOAM) with IPv6 [ 3.927231] NET: Registered PF_PACKET protocol family [ 3.932444] 9pnet: Installing 9P2000 support [ 3.936755] Key type dns_resolver registered [ 3.941577] Loading compiled-in X.509 certificates [ 3.946593] zswap: loaded using pool lzo/zbud [ 3.951724] Key type ._fscrypt registered [ 3.955748] Key type .fscrypt registered [ 3.959680] Key type fscrypt-provisioning registered [ 3.964743] pstore: Using crash dump compression: deflate [ 3.976396] fsl_mc_bus NXP0008:00: MC firmware version: 10.31.0 [ 3.984888] fsl_mc_dprc dprc.1: DMA mask not set [ 4.031538] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd [ 4.088598] hub 4-1:1.0: USB hub found [ 4.092680] hub 4-1:1.0: 4 ports detected [ 4.103995] usb 1-1.2: new high-speed USB device number 3 using xhci-hcd [ 4.149040] fsl_mc_dpio dpio.15: probed [ 4.158558] fsl_mc_dpio dpio.14: probed [ 4.168153] fsl_mc_dpio dpio.13: probed [ 4.177535] fsl_mc_dpio dpio.12: probed [ 4.187088] fsl_mc_dpio dpio.11: probed [ 4.196509] fsl_mc_dpio dpio.10: probed [ 4.206061] fsl_mc_dpio dpio.9: probed [ 4.215584] fsl_mc_dpio dpio.8: probed [ 4.225025] fsl_mc_dpio dpio.7: probed [ 4.234537] fsl_mc_dpio dpio.6: probed [ 4.244034] fsl_mc_dpio dpio.5: probed [ 4.251980] usb 3-1.2: new high-speed USB device number 3 using xhci-hcd [ 4.253011] fsl_mc_dpio dpio.4: probed [ 4.268206] fsl_mc_dpio dpio.3: probed [ 4.277528] fsl_mc_dpio dpio.2: probed [ 4.287049] fsl_mc_dpio dpio.1: probed [ 4.292248] usb 2-1.4: new SuperSpeed USB device number 3 using xhci-hcd [ 4.296510] fsl_mc_dpio dpio.0: probed [ 4.306364] fsl_mc_dprc dprc.1: DPRC device bound to driver [ 4.393248] hub 2-1.4:1.0: USB hub found [ 4.397739] hub 2-1.4:1.0: 4 ports detected [ 4.435992] usb 1-1.4: new high-speed USB device number 4 using xhci-hcd [ 4.440796] hub 3-1.2:1.0: USB hub found [ 4.447133] hub 3-1.2:1.0: 4 ports detected [ 4.464194] usb 4-1.2: new SuperSpeed USB device number 3 using xhci-hcd [ 4.532719] fsl_dpaa2_eth dpni.0 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:01] driver [Qualcomm Atheros AR8035] (irq=POLL) [ 4.546106] fsl_dpaa2_eth dpni.0: Probed interface eth0 [ 4.551577] ALSA device list: [ 4.554576] No soundcards found. [ 4.562006] Freeing unused kernel memory: 10304K [ 4.568080] Run /init as init process [ 4.571751] with arguments: [ 4.571754] /init [ 4.571756] with environment: [ 4.571758] HOME=/ [ 4.571760] TERM=linux [ 4.601137] hub 1-1.4:1.0: USB hub found [ 4.605962] hub 1-1.4:1.0: 4 ports detected [ 4.608517] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module aes_ce_cipher... [ 4.611574] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module af_packet... [ 4.613852] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module ahci_platform... [ 4.616496] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module ahci_qoriq... [ 4.619053] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module at803x... [ 4.621686] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module blake2b_generic... [ 4.625555] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module cec... [ 4.631182] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module crct10dif_ce... [ 4.634586] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module cryptd... [ 4.637577] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module crypto_simd... [ 4.640257] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module dm_mod... [ 4.648506] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 4.659905] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module dm_multipath... [ 4.665478] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module drm... [ 4.695493] stage-1-init: [Sun Jan 16 11:40:45 UTC 2022] loading module drm_kms_helper... [ 4.711864] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module dwc3... [ 4.714616] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module efi_pstore... [ 4.717246] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module efivarfs... [ 4.720011] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module fat... [ 4.722702] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module fb_sys_fops... [ 4.725523] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module fsl_dpaa2_eth... [ 4.728218] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module fsl_mc_dpio... [ 4.730924] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module ghash_ce... [ 4.733751] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module hid_generic... [ 4.736444] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module i2c_algo_bit... [ 4.739164] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module i2c_imx... [ 4.741826] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module iscsi_boot_sysfs... [ 4.744550] hub 4-1.2:1.0: USB hub found [ 4.745410] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module iscsi_ibft... [ 4.748654] No iBFT detected. [ 4.748730] hub 4-1.2:1.0: 4 ports detected [ 4.754516] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module libahci_platform... [ 4.757465] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module libcrc32c... [ 4.760887] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module lm90... [ 4.765475] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module mc... [ 4.768638] mc: Linux media interface: v0.10 [ 4.775745] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module mmc_block... [ 4.778589] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module mmc_core... [ 4.781351] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module nvme... [ 4.791741] nvme nvme0: pci function 0002:01:00.0 [ 4.800017] usb 3-1.3: new high-speed USB device number 4 using xhci-hcd [ 4.803375] nvme nvme0: 8/0/0 default/read/poll queues [ 4.813998] nvme0n1: p1 p2 p128 [ 4.820499] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module nvme_core... [ 4.823206] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module pcs_lynx... [ 4.825985] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module phylink... [ 4.830117] stage-1-init: [Sun Jan 16 11:40:46 UTC 2022] loading module raid6_pq... [ 4.903975] raid6: neonx8 gen() 6269 MB/s [ 4.952490] hub 3-1.3:1.0: USB hub found [ 4.959938] hub 3-1.3:1.0: 4 ports detected [ 4.967975] usb 1-1.4.3: new high-speed USB device number 5 using xhci-hcd [ 4.975977] raid6: neonx8 xor() 4611 MB/s [ 5.040000] usb 3-1.2.1: new low-speed USB device number 5 using xhci-hcd [ 5.051986] raid6: neonx4 gen() 6348 MB/s [ 5.124037] raid6: neonx4 xor() 4782 MB/s [ 5.196048] raid6: neonx2 gen() 5669 MB/s [ 5.267987] raid6: neonx2 xor() 4388 MB/s [ 5.276221] input: Logitech USB Trackball as /devices/platform/808622B7:01/xhci-hcd.2.auto/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1:1.0/0003:046D:C408.0001/input/input1 [ 5.293624] hid-generic 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-xhci-hcd.2.auto-1.2.1/input0 [ 5.339983] raid6: neonx1 gen() 4379 MB/s [ 5.411988] raid6: neonx1 xor() 3522 MB/s [ 5.447999] usb 3-1.2.2: new low-speed USB device number 6 using xhci-hcd [ 5.483982] raid6: int64x8 gen() 3649 MB/s [ 5.555989] raid6: int64x8 xor() 2127 MB/s [ 5.627982] raid6: int64x4 gen() 3591 MB/s [ 5.692172] input: HID 0430:0005 as /devices/platform/808622B7:01/xhci-hcd.2.auto/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/0003:0430:0005.0002/input/input2 [ 5.699988] raid6: int64x4 xor() 2166 MB/s [ 5.768223] hid-generic 0003:0430:0005.0002: input,hidraw1: USB HID v1.00 Keyboard [HID 0430:0005] on usb-xhci-hcd.2.auto-1.2.2/input0 [ 5.783976] raid6: int64x2 gen() 3426 MB/s [ 5.855979] raid6: int64x2 xor() 1921 MB/s [ 5.927975] raid6: int64x1 gen() 2657 MB/s [ 5.999976] raid6: int64x1 xor() 1430 MB/s [ 6.007559] raid6: using algorithm neonx4 gen() 6348 MB/s [ 6.016282] raid6: .... xor() 4782 MB/s, rmw enabled [ 6.024532] raid6: using neon recovery algorithm [ 6.035545] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module rc_core... [ 6.041856] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module roles... [ 6.045762] ftm-alarm NXP0014:00: registered as rtc1 [ 6.046215] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module rtc_fsl_ftm_alarm... [ 6.059867] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module sbsa_gwdt... [ 6.061119] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module sdhci... [ 6.062320] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module sdhci_of_esdhc... [ 6.063103] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.063163] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 6.063219] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 6.063273] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 6.063654] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module sdhci_pltfm... [ 6.115813] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module sg... [ 6.117186] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module sha1_ce... [ 6.118517] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module sha256_arm64... [ 6.119888] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module sha2_ce... [ 6.121243] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module syscopyarea... [ 6.122654] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module sysfillrect... [ 6.123991] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module sysimgblt... [ 6.125322] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module ttm... [ 6.126713] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module udc_core... [ 6.128060] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module uio... [ 6.129442] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module uio_pdrv_genirq... [ 6.130876] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module ulpi... [ 6.132215] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module usbcore... [ 6.134175] xor: measuring software checksum speed [ 6.135246] 8regs : 9228 MB/sec [ 6.136182] 32regs : 10658 MB/sec [ 6.137232] arm64_neon : 9395 MB/sec [ 6.167725] xor: using function: 32regs (10658 MB/sec) [ 6.206304] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module usbhid... [ 6.207605] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module vfat... [ 6.208804] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module xgmac_mdio... [ 6.209977] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module xhci_hcd... [ 6.211155] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module xhci_plat_hcd... [ 6.212337] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module xor... [ 6.213504] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module xor_neon... [ 6.214656] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module btrfs... [ 6.264237] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 6.277975] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] loading module dm_mod... [ 6.283003] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] running udev... [ 6.297016] stage-1-init: [Sun Jan 16 11:40:47 UTC 2022] Starting version 249.7 [ 8.920170] random: crng init done [ 8.928350] stage-1-init: [Sun Jan 16 11:40:50 UTC 2022] Passphrase for /dev/disk/by-uuid/f00a1a22-4e3b-4f31-aa0f-4e706cbd52e1: [ 10.975216] Key type encrypted registered [ 11.014010] stage-1-init: [Sun Jan 16 11:40:52 UTC 2022] Verifying passphrase for /dev/disk/by-uuid/f00a1a22-4e3b-4f31-aa0f-4e706cbd52e1... - success [ 11.018106] stage-1-init: [Sun Jan 16 11:40:52 UTC 2022] Passphrase for /dev/disk/by-uuid/415233a2-075d-4f48-92a5-778a4152b43f: reused [ 12.758961] stage-1-init: [Sun Jan 16 11:40:54 UTC 2022] Verifying passphrase for /dev/disk/by-uuid/415233a2-075d-4f48-92a5-778a4152b43f... - success [ 12.765292] stage-1-init: [Sun Jan 16 11:40:54 UTC 2022] starting device mapper and LVM... [ 18.037082] BTRFS: device fsid 3df8c3a5-f7b6-4afc-be24-93c1854ca283 devid 1 transid 1036016 /dev/mapper/root1 scanned by btrfs (711) [ 18.052305] BTRFS: device fsid 3df8c3a5-f7b6-4afc-be24-93c1854ca283 devid 2 transid 1036016 /dev/mapper/root2 scanned by btrfs (711) [ 18.068892] stage-1-init: [Sun Jan 16 11:40:59 UTC 2022] Scanning for Btrfs filesystems [ 18.510203] stage-1-init: [Sun Jan 16 11:40:59 UTC 2022] Scanning for Btrfs filesystems [ 18.544708] stage-1-init: [Sun Jan 16 11:40:59 UTC 2022] mounting none on /... [ 18.568732] stage-1-init: [Sun Jan 16 11:40:59 UTC 2022] mounting /dev/disk/by-uuid/3df8c3a5-f7b6-4afc-be24-93c1854ca283 on /mnt/persist... [ 18.570582] BTRFS info (device dm-0): flagging fs with big metadata feature [ 18.570592] BTRFS info (device dm-0): enabling auto defrag [ 18.570596] BTRFS info (device dm-0): use zstd compression, level 3 [ 18.570600] BTRFS info (device dm-0): using free space tree [ 18.570603] BTRFS info (device dm-0): has skinny extents [ 18.682980] BTRFS info (device dm-0): enabling ssd optimizations [ 18.692685] BTRFS info (device dm-0): checking UUID tree [ 18.720829] stage-1-init: [Sun Jan 16 11:41:00 UTC 2022] mounting /dev/disk/by-uuid/3df8c3a5-f7b6-4afc-be24-93c1854ca283 on /nix... [ 18.744862] stage-1-init: [Sun Jan 16 11:41:00 UTC 2022] mounting /dev/disk/by-uuid/3df8c3a5-f7b6-4afc-be24-93c1854ca283 on /var/log... [ 19.139528] booting system configuration /nix/store/m26s7zindh87di1lk9h3f0jk63w85ih7-nixos-system-zarathustra-21.11.335130.386234e2a61 [ 19.209741] stage-2-init: running activation script... [ 19.505197] stage-2-init: setting up /etc... [ 19.929853] systemd[1]: systemd 249.7 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) [ 19.963664] systemd[1]: Detected architecture arm64. [ 20.190642] systemd[1]: Queued start job for default target Graphical Interface. [ 20.201818] systemd[1]: Unnecessary job was removed for /dev/mapper/root1. [ 20.229549] systemd[1]: Created slice Virtual Machine and Container Slice. [ 20.246006] systemd[1]: Created slice Slice /system/getty. [ 20.260468] systemd[1]: Created slice Slice /system/modprobe. [ 20.275221] systemd[1]: Created slice Slice /system/serial-getty. [ 20.290420] systemd[1]: Created slice Slice /system/systemd-fsck. [ 20.336803] systemd[1]: Created slice User and Session Slice. [ 20.351091] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 20.367721] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 20.384132] systemd[1]: Reached target Local Encrypted Volumes. [ 20.398820] systemd[1]: Reached target Path Units. [ 20.412427] systemd[1]: Reached target Remote File Systems. [ 20.426762] systemd[1]: Reached target Slice Units. [ 20.442744] systemd[1]: Listening on Process Core Dump Socket. [ 20.458789] systemd[1]: Listening on Journal Audit Socket. [ 20.473418] systemd[1]: Listening on Journal Socket (/dev/log). [ 20.488526] systemd[1]: Listening on Journal Socket. [ 20.503270] systemd[1]: Listening on Network Service Netlink Socket. [ 20.519475] systemd[1]: Listening on udev Control Socket. [ 20.534019] systemd[1]: Listening on udev Kernel Socket. [ 20.565552] systemd[1]: Mounting Huge Pages File System... [ 20.582472] systemd[1]: Mounting POSIX Message Queue File System... [ 20.600331] systemd[1]: Mounting Kernel Debug File System... [ 20.618015] systemd[1]: Starting Create List of Static Device Nodes... [ 20.635820] systemd[1]: Starting Load Kernel Module configfs... [ 20.653118] systemd[1]: Starting Load Kernel Module drm... [ 20.669887] systemd[1]: Starting Load Kernel Module fuse... [ 20.684074] fuse: init (API version 7.34) [ 20.695736] systemd[1]: Starting mount-pstore.service... [ 20.710417] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 20.726382] systemd[1]: Starting Journal Service... [ 20.743636] systemd[1]: Starting Load Kernel Modules... [ 20.761111] systemd[1]: Starting Remount Root and Kernel File Systems... [ 20.776847] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 20.798752] audit: type=1334 audit(1642333262.095:2): prog-id=42 op=LOAD [ 20.810049] audit: type=1334 audit(1642333262.107:3): prog-id=43 op=LOAD [ 20.811110] systemd[1]: Starting Coldplug All udev Devices... [ 20.838116] audit: type=1334 audit(1642333262.135:4): prog-id=44 op=LOAD [ 20.849351] audit: type=1334 audit(1642333262.151:5): prog-id=45 op=LOAD [ 20.860602] audit: type=1334 audit(1642333262.151:6): prog-id=0 op=UNLOAD [ 20.871937] audit: type=1334 audit(1642333262.151:7): prog-id=0 op=UNLOAD [ 20.874811] systemd[1]: Started Journal Service. [ 20.883414] audit: type=1334 audit(1642333262.159:8): prog-id=46 op=LOAD [ 20.903871] audit: type=1334 audit(1642333262.171:9): prog-id=47 op=LOAD [ 20.915098] audit: type=1334 audit(1642333262.171:10): prog-id=0 op=UNLOAD [ 20.915103] audit: type=1334 audit(1642333262.171:11): prog-id=0 op=UNLOAD [ 21.038961] systemd-journald[1195]: Received client request to flush runtime journal. [ 21.434535] zram: Added device: zram0 [ 21.520007] snd_hda_intel 0004:01:00.1: enabling device (0000 -> 0002) [ 21.533585] snd_hda_intel 0004:01:00.1: Force to snoop mode by module option [ 21.534510] arm-ccn PRP0001:00: No access to interrupts, using timer. [ 21.614363] mousedev: PS/2 mouse device common for all mice [ 21.636952] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0004:01/0004:01:00.1/sound/card0/input3 [ 21.650088] BTRFS info (device dm-0): devid 1 device path /dev/mapper/root1 changed to /dev/dm-0 scanned by systemd-udevd (1303) [ 21.653390] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0004:01/0004:01:00.1/sound/card0/input4 [ 21.669707] BTRFS info (device dm-0): devid 2 device path /dev/disk/by-uuid/3df8c3a5-f7b6-4afc-be24-93c1854ca283 changed to /dev/dm-1 scanned by systemd-udevd (1331) [ 21.792273] [drm] amdgpu kernel modesetting enabled. [ 21.792432] amdgpu: CRAT table disabled by module option [ 21.792438] amdgpu: IO link not available for non x86 platforms [ 21.792440] amdgpu: Virtual CRAT table created for CPU [ 21.792466] amdgpu: Topology: Add CPU node [ 21.792782] checking generic (a400000000 1fa4000) vs hw (a400000000 10000000) [ 21.792786] fb0: switching to amdgpu from EFI VGA [ 21.798423] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 21.872674] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 21.872699] Loading firmware: regulatory.db [ 21.876060] Loading firmware: regulatory.db.p7s [ 21.950755] Console: switching to colour dummy device 80x25 [ 21.956691] amdgpu 0004:01:00.0: enabling device (0006 -> 0007) [ 21.962620] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1462:0x8A90 0xC7). [ 21.971359] amdgpu 0004:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 21.971373] [drm] register mmio base: 0x40000000 [ 21.971375] [drm] register mmio size: 262144 [ 21.971382] [drm] add ip block number 0 [ 21.987243] zram0: detected capacity change from 0 to 32222032 [ 21.988471] [drm] add ip block number 1 [ 22.004004] [drm] add ip block number 2 [ 22.004010] [drm] add ip block number 3 [ 22.004012] [drm] add ip block number 4 [ 22.004015] [drm] add ip block number 5 [ 22.023416] [drm] add ip block number 6 [ 22.023422] [drm] add ip block number 7 [ 22.023425] [drm] add ip block number 8 [ 22.023466] amdgpu 0004:01:00.0: amdgpu: Fetched VBIOS from VFCT [ 22.043342] amdgpu: ATOM BIOS: 113-D09002-M11 [ 22.043373] [drm] UVD is enabled in VM mode [ 22.051928] [drm] UVD ENC is enabled in VM mode [ 22.051931] [drm] VCE enabled in VM mode [ 22.052004] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 22.068784] Loading firmware: amdgpu/polaris12_mc.bin [ 22.077023] amdgpu 0004:01:00.0: BAR 2: releasing [mem 0xa410000000-0xa4101fffff 64bit pref] [ 22.085477] amdgpu 0004:01:00.0: BAR 0: releasing [mem 0xa400000000-0xa40fffffff 64bit pref] [ 22.085504] amdgpu 0004:01:00.0: BAR 0: assigned [mem 0xa500000000-0xa5ffffffff 64bit pref] [ 22.102301] amdgpu 0004:01:00.0: BAR 2: assigned [mem 0xa400000000-0xa4001fffff 64bit pref] [ 22.110689] amdgpu 0004:01:00.0: amdgpu: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) [ 22.110695] amdgpu 0004:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF [ 22.128610] [drm] Detected VRAM RAM=4096M, BAR=4096M [ 22.128613] [drm] RAM width 128bits GDDR5 [ 22.128696] [drm] amdgpu: 4096M of VRAM memory ready [ 22.142571] [drm] amdgpu: 4096M of GTT memory ready. [ 22.142590] [drm] GART: num cpu pages 65536, num gpu pages 65536 [ 22.155361] [drm] PCIE GART of 256M enabled (table at 0x000000F401FA4000). [ 22.162391] Loading firmware: amdgpu/polaris12_pfp_2.bin [ 22.168874] Loading firmware: amdgpu/polaris12_me_2.bin [ 22.174724] Loading firmware: amdgpu/polaris12_ce_2.bin [ 22.180576] [drm] Chained IB support enabled! [ 22.184935] Loading firmware: amdgpu/polaris12_rlc.bin [ 22.190414] Loading firmware: amdgpu/polaris12_mec_2.bin [ 22.196984] Loading firmware: amdgpu/polaris12_mec2_2.bin [ 22.205939] Loading firmware: amdgpu/polaris12_sdma.bin [ 22.211982] Loading firmware: amdgpu/polaris12_sdma1.bin [ 22.213918] Adding 16111012k swap on /dev/zram0. Priority:5 extents:1 across:16111012k SSFS [ 22.217887] amdgpu: hwmgr_sw_init smu backed is polaris10_smu [ 22.229536] BTRFS info (device dm-0): devid 2 device path /dev/dm-1 changed to /dev/mapper/root2 scanned by mount (1448) [ 22.231523] Loading firmware: amdgpu/polaris12_uvd.bin [ 22.240146] usb 1-1.2: reset high-speed USB device number 3 using xhci-hcd [ 22.256806] [drm] Found UVD firmware Version: 1.130 Family ID: 16 [ 22.264066] Loading firmware: amdgpu/polaris12_vce.bin [ 22.270694] [drm] Found VCE firmware Version: 53.26 Binary ID: 3 [ 22.277909] Loading firmware: amdgpu/polaris12_smc.bin [ 22.349101] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected [ 22.366466] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000f detected [ 22.373534] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 22.381434] [drm] Display Core initialized with v3.2.149! [ 22.408071] snd_hda_intel 0004:01:00.1: bound 0004:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) [ 22.452131] usb 1-1.4.3: reset high-speed USB device number 5 using xhci-hcd [ 22.577068] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected [ 22.587371] [drm] UVD and UVD ENC initialized successfully. [ 22.594403] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected [ 22.601479] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 22.602178] usbcore: registered new interface driver rt2800usb [ 22.628547] loop0: detected capacity change from 0 to 131072 [ 22.637410] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 22.654427] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 22.663335] Loading firmware: rt2870.bin [ 22.667435] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 22.681857] fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-ce" [ 22.693306] [drm] VCE initialized successfully. [ 22.693423] fscrypt: AES-256-XTS using implementation "xts-aes-ce" [ 22.698284] kfd kfd: amdgpu: Allocated 3969056 bytes on gart [ 22.709841] amdgpu: SRAT table not found [ 22.713783] amdgpu: Virtual CRAT table created for GPU [ 22.713894] amdgpu: Topology: Add dGPU node [0x699f:0x1002] [ 22.724512] kfd kfd: amdgpu: added device 1002:699f [ 22.724549] amdgpu 0004:01:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 5, active_cu_number 8 [ 22.744481] [drm] fb mappable at 0xA5024D4000 [ 22.748857] [drm] vram apper at 0xA500000000 [ 22.748861] [drm] size 33177600 [ 22.748862] [drm] fb depth is 24 [ 22.748864] [drm] pitch is 15360 [ 22.838929] Console: switching to colour frame buffer device 480x135 [ 22.900835] amdgpu 0004:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device [ 22.925526] amdgpu 0004:01:00.0: amdgpu: Using BACO for runtime pm [ 22.926250] [drm] Initialized amdgpu 3.42.0 20150101 for 0004:01:00.0 on minor 0 [ 23.000165] guest-br: port 1(wlan0) entered blocking state [ 23.005723] guest-br: port 1(wlan0) entered disabled state [ 23.013797] device wlan0 entered promiscuous mode [ 23.020263] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 23.029448] Loading firmware: rt2870.bin [ 23.029475] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 23.399726] internet-br: port 1(eth0) entered blocking state [ 23.405438] internet-br: port 1(eth0) entered disabled state [ 23.411308] device eth0 entered promiscuous mode [ 23.440850] fsl_dpaa2_eth dpni.0 eth0: configuring for phy/rgmii-id link mode [ 23.470257] guest-br: port 2(wlan1) entered blocking state [ 23.475927] guest-br: port 2(wlan1) entered disabled state [ 23.482328] device wlan1 entered promiscuous mode [ 23.487578] guest-br: port 2(wlan1) entered blocking state [ 23.493215] guest-br: port 2(wlan1) entered forwarding state [ 23.499234] IPv6: ADDRCONF(NETDEV_CHANGE): guest-br: link becomes ready [ 23.596646] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 23.628214] guest-br: port 3(vb-tuxeravpn) entered blocking state [ 23.634428] guest-br: port 3(vb-tuxeravpn) entered disabled state [ 23.640999] device vb-tuxeravpn entered promiscuous mode [ 23.646657] guest-br: port 3(vb-tuxeravpn) entered blocking state [ 23.652854] guest-br: port 3(vb-tuxeravpn) entered forwarding state [ 23.661345] internet-br: port 2(vb-radicale) entered blocking state [ 23.667755] internet-br: port 2(vb-radicale) entered disabled state [ 23.667994] device vb-radicale entered promiscuous mode [ 23.679674] internet-br: port 2(vb-radicale) entered blocking state [ 23.686036] internet-br: port 2(vb-radicale) entered forwarding state [ 23.686169] IPv6: ADDRCONF(NETDEV_CHANGE): internet-br: link becomes ready [ 23.700112] guest-br: port 3(vb-tuxeravpn) entered disabled state [ 23.706680] internet-br: port 2(vb-radicale) entered disabled state [ 23.715110] nat-br: port 1(wlx50_priv) entered blocking state [ 23.720974] nat-br: port 1(wlx50_priv) entered disabled state [ 23.727139] device wlx50_priv entered promiscuous mode [ 23.740227] nat-br: port 1(wlx50_priv) entered blocking state [ 23.746067] nat-br: port 1(wlx50_priv) entered forwarding state [ 23.760056] IPv6: ADDRCONF(NETDEV_CHANGE): nat-br: link becomes ready [ 23.774371] IPv6: ADDRCONF(NETDEV_CHANGE): wlx50_priv: link becomes ready [ 23.853828] eth0: renamed from host0 [ 23.900410] eth0: renamed from host0 [ 23.966910] IPv6: ADDRCONF(NETDEV_CHANGE): vb-radicale: link becomes ready [ 23.974221] internet-br: port 2(vb-radicale) entered blocking state [ 23.980610] internet-br: port 2(vb-radicale) entered forwarding state [ 23.987523] IPv6: ADDRCONF(NETDEV_CHANGE): vb-tuxeravpn: link becomes ready [ 23.994840] guest-br: port 3(vb-tuxeravpn) entered blocking state [ 24.001070] guest-br: port 3(vb-tuxeravpn) entered forwarding state [ 25.619453] BTRFS: device fsid 189a46b2-2af7-446b-a6bc-5263f0243763 devid 10 transid 227144 /dev/dm-2 scanned by systemd-udevd (1282) [ 26.754963] BTRFS: device fsid 189a46b2-2af7-446b-a6bc-5263f0243763 devid 9 transid 227144 /dev/dm-3 scanned by systemd-udevd (1282) [ 26.948735] BTRFS: device fsid 189a46b2-2af7-446b-a6bc-5263f0243763 devid 7 transid 227144 /dev/dm-5 scanned by systemd-udevd (1306) [ 26.979690] BTRFS: device fsid 189a46b2-2af7-446b-a6bc-5263f0243763 devid 8 transid 227144 /dev/dm-6 scanned by systemd-udevd (1303) [ 27.026871] BTRFS: device label sal_backup devid 3 transid 11625 /dev/dm-7 scanned by systemd-udevd (1303) [ 27.042186] BTRFS: device fsid 189a46b2-2af7-446b-a6bc-5263f0243763 devid 1 transid 227144 /dev/dm-4 scanned by systemd-udevd (1282) [ 27.197841] BTRFS info (device dm-4): flagging fs with big metadata feature [ 27.204822] BTRFS info (device dm-4): enabling auto defrag [ 27.210353] BTRFS info (device dm-4): use zstd compression, level 3 [ 27.216625] BTRFS info (device dm-4): using free space tree [ 27.222198] BTRFS info (device dm-4): has skinny extents [ 27.560341] fsl_dpaa2_eth dpni.0 eth0: Link is Up - 1Gbps/Full - flow control off [ 27.567889] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 27.574267] internet-br: port 1(eth0) entered blocking state [ 27.579935] internet-br: port 1(eth0) entered forwarding state [ 28.067397] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 28.073882] guest-br: port 1(wlan0) entered blocking state [ 28.079379] guest-br: port 1(wlan0) entered forwarding state [ 28.109946] nat-br: port 2(wlx24_priv) entered blocking state [ 28.115726] nat-br: port 2(wlx24_priv) entered disabled state [ 28.121630] device wlx24_priv entered promiscuous mode [ 28.134066] nat-br: port 2(wlx24_priv) entered blocking state [ 28.139843] nat-br: port 2(wlx24_priv) entered forwarding state [ 28.153145] IPv6: ADDRCONF(NETDEV_CHANGE): wlx24_priv: link becomes ready [18694.544303] loop0: detected capacity change from 0 to 4294967296 [18704.120460] BTRFS: device label sal_backup devid 4 transid 11625 /dev/loop0 scanned by mount (98457) [18704.132211] BTRFS info (device dm-7): flagging fs with big metadata feature [18704.139203] BTRFS info (device dm-7): enabling auto defrag [18704.144695] BTRFS info (device dm-7): use zstd compression, level 3 [18704.150961] BTRFS info (device dm-7): using free space tree [18704.156529] BTRFS info (device dm-7): has skinny extents